
样本:点击下载

Top Stop Setting Fixture-All PT (type D), STC (HVT), and Hyperbar Top Stop Injectors. Measuring fuel injector volume completed, we must test the injector plunger
subassembly. (including STC (HVT) and hypervar top stop injectors). This Top Stop
Setting Fixture used to the test of the injector. After the leakage testing of the injector
is completed, the injector can be assembles to the point where the plunger top stop, or plunger
travel setting can be made.

Description:
Top Stop Setting Fixture – All PT (type D), STC (HBT), and Hyperbar Top Stop Injectors. This bulletin contains the assembly, installation, and Operating instructions for the Top Stop Setting Fixture, Part no.3822696.
Table 1: Top-Stop setting Fixture Part PT101
REFNO PART NO. DESCPTION QTY
1 Control panel 1
2 Upper plate 1
3 Lower plate 1
4 Side rails 2
5 Bottom plate 1
6 Center plunge 1
7 3822745 Injector stop nut 1
8 Indicator arm 1
9 20LB.Dead weight 1
10 3375391 Overcenter Clamp 2
11
Measurement System
Mounting Plate 1
12 3822727 L-10 Adapter 1
13 3822726 Holding Bracket 1
14 205462 K Injector Plunger Link 1
15
3025181or
3052233 K-STC Injector Plunger
Link 1
1
16 3822730 The Indicator 1
17 1
18 Connecting Cord 1
19 Power cord 1
20 3822733 Presetter Mounting Screws 2





