CR-C Multi Function Common Rail Injector Tester Meter Tool

CR-C multifunctional common rail injector detector is easy to operate. It can meet the detection of common rail injector together with common nozzle tester. So it effectively lowers the investment threshold of maintenance equipment. The detector is small in size and easy to carry, and can help customers to detect and maintain common rail injector en route, which can greatly improve work efficiency.
The instrument parameters
- Product type:CR-C multi function of common rail injector tester
- Test range: the atomization effect,pre injection,the discharge point,full load point.
- Suitable for:Bosch,Delphi,Denso,domestic and common type
- Power supply:AC110-240V
- Working temperature:-30 degrees Celsius—70 degrees Celsius
- Dimensions:110*250*190(millimeter)
- The adjustable pulse width:10MS
- Adjustable frequency:30HZ
- Operator Interface
- LCD screen: The upper left corner of the instrument is used to display the frequency pulse width value.

- Indicator light: to show current status and drive mode.

Function key:
- to run or stop—to turn on and off the signal output.
- Drive mode—Select the drive mode by the left and right keys.
- MS knob: to adjust pulse width.
- HZ knob: to adjust frequency.
- Signal outlet: to connect injector harness.
- Power supply: to turn on and off the main power
- Operational Method
1.The common rail injector is directly connected or loaded into the clamp and connected to the common hand pressure calibrator.
2.Select the appropriate plug according to the injector brand and then connect the wiring harness to the injector.

3. According to the injector brand, select the corresponding drive mode. At this time, you can hear the injector solenoid valve suction armature "pa,pa" sound.

4. Provide the proper injection pressure by continuously lowering the lever of the calibrator. The general pressure value is 30-40MPA, and the atomization performance of the injector can be observed at this time.

Through the external cylinder, fuel oil quantity and return oil quantity of fuel injector can be detected.

Maintenance and precautions
1.To ensure the service life of the instrument, the instrument should not be used in direct sunlight, the place should be more level, is strictly prohibited to fall, touch.
2.It is strictly forbidden to use strong solvent (such as: stupid, nitro oil) to clean the casing
3.Instrument external interface shall be used strictly according to the method stated in the instruction manual, and the connection shall not be altered without authorization.The instrument is impulse driven to the injector and can not be measured by the general multimeter.When this table fails during use, the plug shall be immediately removed and returned to the manufacturer for three packet service.

4. The meter from the date of sale within three months under normal conditions of use, appear non-human fault warranty scope, please user product and warranty card (no match) were sent to special vendors, life-long repair of instrument factory. This instrument is not allowed to open at will, otherwise it will not be guaranteed.

Items	CR-C
function	Test atomization effect, pilot injection, discharge point and full load point.
Type of the motivation	BOCH,DENSO,DELPHI, modes made in China and general
Max. pulse width	10MS
Max. frequency	30HZ
power	AC110~240V 50Hz
Operating temperature	-30-70C°
Packing size	110250190mm
weight	5kg

1
艾能空压机种类、规格齐全
艾能压缩机是高效、品质卓越的，凭借雄厚的技术力量和丰富的制造经验，艾能螺杆压缩机品种及规格齐全，能够满足不同用户对气体品质、气量大小、使用工况等的不同要求，主要产品有：固定式螺杆空压机、双级压缩永磁变频空压机、变频空压机、永磁变频空压机、低压力螺杆空压机、工程用移动式螺杆空压机、蜗旋式螺杆空压机、矿用移动式螺杆空压机、无油螺杆空压机、无油中高压压缩机等等。对特种行业或特殊要求，艾能公司更擅长按照用户要求定制特殊的压缩机。
2
艾能空压机工艺先进、品质杰出
凭借其丰富的经验及不断创新的技术，成为全球重要的螺杆空压机供应商。在德国AERZEN公司的支持下，以及与德国著名ROTORCOMP、GHH-RAND公司的合作，使艾能空压机更上一个台阶。其卓越的主机设计，几十年的实践证明具有极其优良的性能。
3
艾能公司保持德国工业的精湛技术
采用德国技术，精益求精，制造的空压机极具竞争优势，广泛应用于各行各业：石化、纺织、钢铁、煤矿、水电、工程、医疗、水泥（建材）、电子、机械、汽车、食品等等，艾能空压机在中国市场已拥有良好的品牌信誉，满足了工业界对高可靠性、高效率、低能耗压缩机的需求。
4
艾能基于“用户至上”的策略
艾能公司在制造一流空压机的同时，更广泛提供售前和售后服务---快速、可靠、革新，以期最大程度上满足用户需求。智胜公司继续为全国范围的用户提供专业、周到、快捷的服务。