DPF SCR high temperature regeneration test bench cleaning machine

DPF purging detection and dust collection equipment simulates engine exhaust. Before regeneration, the performance of the faulty system or device is tested and displayed and recorded in the form of a curve. After regeneration and purging are completed, the ventilation volume points and Back pressure and other parameters are tested by curve, so as to compare and analyze the regeneration effect. The differential pressure detection before and after regeneration can be performed on the system or device to compare and analyze the regeneration effect.

The system can also choose a weighing method according to user needs, and compare the weight of the carrier before and after regeneration, so as to determine the regeneration effect.

With crack light transmission detection function.

The device is controlled by single chip microcomputer, with high grade, convenient operation and reliable performance

The air volume-back pressure curve test before and after assembly regeneration can be carried out, and the test results can be recorded in the form of a curve, and then the two curves can be compared to determine the regeneration effect.

The air volume-back pressure curve test before and after the carrier regeneration can be carried out, and the test results can be recorded in the form of a curve, and then the two curves can be compared to determine the regeneration effect.

Equipped with pulsed purging function, it is beneficial to remove the soot attached to the carrier; with large air volume purging function, a large amount of floating dust can be blown away at once; equipped with a purging gun, it can carry out targeted purging of locally attached fumes .

During pulsed purging, the purging frequency and purging intensity can be set arbitrarily as required; when purging with large air volume, the blowing volume can be arbitrarily set as required to improve the purging effect.

The airtight purging chamber is designed to effectively remove the purging smoke and dust through a vacuum fan, and through a specially designed filter device, it can effectively collect the smoke dust and carbon ash, filter the mixed gas, and greatly reduce and eliminate environmental pollution. contamination and injury to operators. Fast, convenient, thorough and effective, hygienic and environmentally friendly.

The pipeline is designed with all stainless steel, which avoids the corrosion of the pipeline due to the humid environment, which will cause the secondary damage of the regenerated parts.

The cleaning room is brightly lit, and is equipped with an observation window, which can effectively observe the cleaned parts. The simple and easy-to-operate clamp structure is adopted, which can clamp parts conveniently, quickly and reliably.