PRODUCTS SEARCH
Products
CONTACT US
Tel: 0086-18253885135
Fax: 0086-538-3318184
Address: High Tech Industry Zone of East Tai an city,Shandong Province,China
Function Introduction (double-chamber or three-chamber test) This test bench is used mainly for testing performance of air compressor, master valve, air chamber, quick release valve and four-circuit valve,etc in brake system of various vehicles, and carrying out double-chamber or three-chamber test of master valve.
0086-18253885135
1. Working power: AC380V 50Hz
Motor power: 11KW
Frequency converter power: 11KW
Variable frequency speed regulating range:
No load 0-5000r/min
Load 0-2000r/min(continuously adjustable)
Volume of main air tank: 20L*2 or 20L*3
Auxiliary tank of air pump: 15L
External air source: 1Mpa
Air passing time:0-99.999s
Rated pressure of oil pump: 0-1Mpa(continuously adjustable)
With over-load protection function, phase loss and short circuit protection
function.
2. Function Introduction (double-chamber or three-chamber test)
This test bench is used mainly for testing performance of air compressor,
master valve, air chamber, quick release valve and four-circuit valve,etc in
brake system of various vehicles, and carrying out double-chamber or
three-chamber test of master valve.
Test items:
1.Air compressor: The time required by air compressor to reach the specified
pressure value when run at the rated speed.
2.Master valve: the time required to inflate air from main tank into air
chamber through master valve, and test the air impermeability of the master
valve.
3.Wheel cylinder: after air is inflated from main tank into air chamber to
reach the set pressure value, hold the pressure.
4. Quick release valve: test its air impermeability and quick exhaust
performance.
5.Relay valve: on-off and air impermeability performance.
6.Four-circuit valve: air impermeability, each opening pressure and
sequence.
7.Differential valve: on-off and air impermeability performance.
8.Test the performance of soleniod valve in automobile braking system.
Packing :
Export Plywood case
1700*950*1680=2.71CBM
1040*745*1330=1.03CBM
Total:3.74CBM
G.W: 520KGS
N.G: 400KGS
Very important:
Need your air compressor
and other valves samples to
make fixing and clamps